Sharp all day long
High-twist gabardine and twill drape well and recover from creasing. Fused collars stop curling after washing, and stitched trouser creases stay sharp without daily pressing, even at the end of a long shift.
Get in touch
Sales line+92 329 6140058 Emailbusiness@benjima.com OfficeRungpura, Sialkot, Punjab, Pakistan Working hoursMonday to Saturday, 9:00 to 18:00 PKTFollow

Officers posted at corporate towers, hotels, banks and luxury stores are part of the client's front of house. Their uniform has to look as considered as the lobby they stand in. Benjima makes private security uniforms for security firms and property management groups who need that polished look without losing the practical side of duty wear.
We make officer blazers, non-iron dress shirts, pleated and flat-front slacks, discreet low-profile tactical sets, trench coats and parkas, epaulette tunics, pique polos, V-neck pullovers and accessories such as ties, belts and lanyards. One merchandiser handles your order, from the first trim card to the employee sets packed for each regional office or client site.
The challenge with this kind of uniform is balance. Too formal and officers cannot move; too tactical and they look out of place in a marble lobby. We design for both at once, so the outside looks executive and the inside works hard.


Every private security order begins with a complete sample set tailored within 7 to 10 business days. Have an officer wear it for a shift at a client site. Sit in the car, stand at the desk, walk the floors and check how the blazer sits over a duty belt and radio.
Pocket positions are tested against your issued equipment, so nothing prints through the fabric or pulls the line out of shape. Once you approve the set, bulk cutting begins, and the approved sample becomes the standard every blazer, shirt and pair of slacks is measured against before it leaves us.


The video follows a private security order through our workshop: cutting high-twist gabardine, fusing collars, padding shoulders, stitching permanent trouser creases, embroidering crests and pressing every piece. Your order goes through those same stages, and you receive photos along the way, so you can show your client progress before the uniforms even arrive.
It is worth sharing with your operations director or the property manager at a key client site. Seeing how hidden pockets, belt keepers and crests are built makes it easier to agree on the look and the function you need, whether that is a lighter blazer for warm lobbies or a parka for outdoor gate posts.
Rather talk first? Send us your company colours, logo files and uniform guidelines, and we will suggest a full wardrobe on a call.


An executive look, hidden function, and one team that owns your order from fabric to finished carton.
High-twist gabardine and twill drape well and recover from creasing. Fused collars stop curling after washing, and stitched trouser creases stay sharp without daily pressing, even at the end of a long shift.
Our digitisers turn your logo into clean stitch files that keep fine lines and small text sharp. You approve a stitched crest before bulk begins on any order.
Fabric, cutting and sewing happen under one roof, so an outside mill's shortage does not hold your uniforms back. One team owns every stage, so nothing gets lost between subcontractors.
Sample sets take 7 to 10 business days, and bulk runs 21 to 30 days. Urgent top-ups can fly by express air while scheduled restocks go by sea, so you can plan uniforms around each new contract start date.

Formal uniforms have to survive real work: long hours standing, sitting in vehicles and moving quickly when needed. Anti-crease poly-viscose keeps a smooth drape that still looks pressed late in the shift, and cotton-rich shirts absorb moisture so officers stay composed under pressure.
Blazers are half-lined to stay cool indoors, with light shoulder padding for a clean outline without bulk. Soft neck tapes and labels do not scratch officers buttoned to the collar all day.
Request a quoteBlazers, dress shirts, slacks and crests from recent orders for private security firms and property groups.
Choose the pieces your officers need for each client site. Every item carries your crest, colours and private-label trims.

Structured poly-viscose blazers with embroidered chest crests and metal buttons for front-of-house posts.

Non-iron cotton-rich shirts with fused collars, French or barrel cuffs and reinforced badge tabs for a crisp look.

Wrinkle-resistant pleated or flat-front slacks with a concealed stretch waistband for comfort in the car and at the desk.

Supervisory tunics with shoulder epaulettes, braided piping and laser-engraved buttons for senior officers.

Trench coats and mid-length parkas that keep a corporate look on outdoor shifts.

Heavy 220 GSM pique polos with curl-free collars and an embroidered agency chest emblem for casual sites.

A private security firm sells trust, and the uniform is where clients see it first. We make high-definition woven and rubberised crest patches, heat-sealed shoulder shields, custom logo neck tapes and laser-engraved metal cuff buttons. Every trim is matched to your brand colours and approved on a trim card before production.
Rank is handled the same way. Button-down epaulette straps carry slide-on rank tabs for supervisors, and bullion wire rank patches can go on the sleeves. Badges and crests can be supplied loose for later issue or attached before packing, whichever suits how you onboard officers.
Finished uniforms are packed in frosted eco garment bags or branded bags and sorted into employee sets. We can also split shipments by regional office or officer name. Because small trims are made alongside the garments, nothing waits on an outside supplier.
The right uniform depends on the site, the client's expectations and what your officers actually do. Before ordering, decide three things: how formal each post should look, what equipment officers need to carry discreetly, and how your branding should appear across ranks.
Blazers, dress shirts and slacks suit corporate towers, banks and hotels where officers greet visitors. Low-profile tactical sets in ripstop suit asset protection and roles that need fast movement. Many firms run both, so the look changes by site while colours and crests stay the same across the whole team.
Internal welt chest pockets, a concealed side-seam zip slot for documents and internal belt keepers let officers carry a notebook, phone and access card without spoiling the line. Matte fasteners draw no attention in upmarket settings.
The best private security uniform looks formal from outside and works like duty wear inside.
High-twist poly-viscose twills, tropical wool blends and non-iron combed cotton poplins keep their crispness through long days. Poly-viscose resists creasing, wool blends breathe in warm lobbies, and non-iron cotton saves officers time each morning. Your sample set lets you compare them on real officers before you choose for bulk.
Watch blazers, shirts and slacks cut, tailored, embroidered and pressed for officers.


Officers in formal uniforms still drive, stand and move fast. These four points keep them comfortable while they look sharp.
A hidden 1.5-inch elastic flex band expands naturally while driving or sitting through long watches, then returns to a neat fit.
A gusseted crotch and shoulder bi-swing let officers move quickly without straining seams or pulling the blazer out of line.
Underarm ventilation eyelets and cotton-rich blends keep officers cool and composed through warm, busy shifts on their feet in crowded lobbies.
Internal heavy-duty keepers anchor the duty belt, so it stays in place when officers move suddenly.
One supplier for the whole firm, so colours, crests and trims stay consistent from patrol officers to senior supervisors.

Five steps from your brand guidelines to employee sets delivered to each office. You approve each stage.
Start your orderSend your company colours, logo files, uniform guidelines and team sizes, and we reply with a suggested wardrobe for each role, fabric options and a clear quote.
Buttons, crests, patches and neck tapes are matched to your brand colours and approved together on one physical trim card.
A complete sample set arrives in 7 to 10 business days for officers to wear on site.
Bulk is tailored to the approved set and checked to AQL 2.5 before packing.
Sets are packed per officer and shipped door to door to each regional office, duties paid.
We accept starting orders of 50 sets per style. That works for a firm outfitting one prestigious client site or a small executive protection unit with tailored apparel. Sizes can be mixed within the order, and once the style is approved it can be rolled out to more sites from the same patterns, trims and colour references we hold on file.
Yes. We tailor complete sample sets in 7 to 10 business days for physical review and fit testing on your officers. Bulk fabric cutting and tailoring only begin after you approve the set, so any change is made before production rather than after.
We recommend high-twist poly-viscose twills, tropical wool blends and wrinkle-resistant combed cotton poplins with a non-iron finish. Each keeps a crisp look through long shifts. We explain the differences in feel, warmth and care before you choose, and show them on your sample set.
Bulk production takes 21 to 30 business days after you sign off the prototype. Express air freight then delivers door to door in 4 to 7 business days, with full DDP customs clearance. Larger scheduled restocks can travel by sea at a lower cost.
Yes. We add concealed interior welt pockets, discreet side-seam document zips and reinforced internal duty belt keepers. Pocket positions are tested against your issued equipment on the sample, so a notebook, phone or access card sits flat and nothing shows through the fabric when officers stand at their post.
Our digitisers work from your vector artwork and Pantone colours, with tight needle tolerances, so crests stay consistent across every garment. You approve a stitched crest before bulk, and the file stays on record for future orders.
Every garment passes AQL 2.5 checks, including seam strength, button pull tests, colour rub-fastness and sizing measurements to the millimetre. The checks happen before packing, so problems are fixed at our end, not discovered by your officers or your clients after delivery.
Yes. We offer split shipments and individual employee wardrobe kits, packed and labelled by regional office or officer name. Each branch receives only what its team needs, ready to hand out, which saves your staff hours of sorting and reshipping uniforms between offices.
| Executive tailored look | Gabardine, twill and poly-viscose blazers and slacks |
|---|---|
| Minimum order | 50 sets per style to start |
| Bulk timeline | 21 to 30 days |
| Discreet storage | Hidden welt pockets and belt keepers |
| Your brand trims | Crests, buttons, tapes and patches |
Share your company colours, logo files and uniform guidelines. We will reply with a wardrobe plan and a quote.
Tell us the garment, the quantity and the date. That is enough for a costing.
We reply within one working day. No mailing list.
A written quote will reach you within one working day.